Description
Cost-effective, hard-wearing ESD bench matting with a smooth finish. Our 2-layer ESD Smooth Matting provides excellent ESD protection. Ideal for laying onto workbenches in places such as laboratories of microelectronic industries or workshops. Suitable to place on ESD workbenches and ESD floor areas where static is controlled. ESD Smooth Matting allows static charges to safely transfer to ground, protecting the surface of static sensitive components from ESD damage during production. Available in dark blue or dark grey, these mats are easy to clean with excellent lay flat properties for a flat work surface.
Featuring two-layers, the matting has a static-dissipative surface and a conductive backing. The static-dissipative surface is resistant to abrasion, heat, solders flux, and most commonly used solvents. The black conductive layer provides a superior and consistent ground path to Earth. The material is 2mm thick. Available to order in 1.20 x 10m full rolls.
Note: The matting must be connected to Earth via a grounding system for it to work. Personnel can easily be grounded to the mat via the 10mm press stud and Earth point.
Product Features:
- Two-layers: static-dissipative surface with a conductive backing
- Resistant to solder splash, hot paste and abrasion
- Very easy to clean with ESD Mat and Table Top Cleaner
- 2mm thick, smooth finish
- Available in 1.2 x 10m full-sized rolls
- Excellent lay-flat properties for a flat work surface, no adhesives required
- All matting can be cut and studded to suit all customer requirements
General Specification:
- Material: NBR rubber (Nitrile Butadiene Rubber)
- Construction: Two layer
- Static dissipative layer resistivity: 10^(6) – 10^(9) Ohms
- Black conductive layer resistivity 10^(3) – 10^(5) Ohms
- Typical resistance to ground = 10^(6) – 10^(8)
- Volume resistance: 10^(5) – 10^(8) Ohms
- Wear rate: 0.02g/cm^(2)
- Electrostatic dissipation time: <0.1s
- Surface treatment: Smooth
- Thickness: 2.00mm
- Colours: Dark grey or dark blue, others on request (minimal variation between batches)
To read the full technical specification, please refer to the product datasheet.
ESD Standards & Regulations Compliance:
 |
IEC-61340-5-1 | |
S20.20 guidelines |
|
ANSI S4.1 |  |
CE approved |
 |
RoHS compliant |  |
REACH compliant |
Customisation
If you would like a bespoke size or custom studding for your ESD mat, please get in touch with our sales team on +44 (0)1793 511000 or send us an email to sales@bondline.co.uk. Please note, all bespoke cut mat sizes will have a +/-10% manufacturing tolerance dependent on size.
Disclaimer: Due to variations in computer monitor displays, colour shown may not be exact.**
