General Questions

A constant monitor is highly recommended; however, it isn’t imperative to use one. When grounding yourself to Earth through the use of a wrist-strap, coil-cord and bonding plug, there’s a chance that you could become disconnected either from Earth, your wrist-strap, bench-mat or even the earth-to-ground system may be functioning incorrectly. This situation could happen at any stage whilst you are working. If you have no way of checking this, then you could be generating static charges and transferring them to static-sensitive devices which can cause damage. A constant monitor continuously monitors and identifies any problems with your wrist-strap, bench mat or the Earth whilst simultaneously checking the earth-to-ground system is working correctly. View our range of constant monitors here.

Surface resistivity meters are essential because they can check whether a surface is insulative, conductive or static-dissipative. They are used to measure surface resistivity and point-to-point resistance. It is vital that you regularly check your bench mat / floor mat with a surface resistivity meter to ensure it’s functioning correctly; if your matting is dirty, a surface resistivity meter can detect whether the surface has changed (usually from static-dissipative to insulative when the matting is dirty). Sometimes a dirty mat may not be clearly visible, so it’s best to check its surface before using it. View our surface resistivity meter here.